VENTRAX Order ArmorCAD 3D

Venturi vacuum · Powder coating

VENTRAX MAXForget masking.

The VENTRAX MAX replaces slow, tedious traditional masking. Coat the part, then vacuum the powder off the areas that must stay uncoated, with pinpoint accuracy. Less prep, more parts per day: time saved is money earned. No motor, no electricity: it runs on the compressed air from your compressor.

3–8 barworking pressure
0 Wno electricity
ASAheat and UV resistant
FRhandmade in France
VENTRAX MAX V2 bleu avec son tuyau d'air bleu, son tuyau silicone transparent et son diffuseur mousse

Workshop pricedirect from the maker

How it works

Compressed air creates the vacuum

Air rushing through the body creates suction at the nozzle (Venturi effect). The powder is drawn in and blown out of the rear outlet: onto the floor through the braided sleeve (V1), or towards the booth filters through the hose and its diffuser (V2).

INLET

Compressed air

Plug the quick coupler into your air line.

3 to 8 bar
BODY

Venturi effect

Accelerating air creates the vacuum. The side valve controls the power.

adjustable valve
NOZZLE

Suction

Stainless straw and a tip chosen for the area: edge, hole, flat surface.

rigid and TPU tips
OUTLET

Exhaust

V1: the powder goes into the braided sleeve and is discharged onto the floor. V2: it comes out through the diffuser, placed at the booth's extraction filters.

to the floor or the filters

The range

Two versions, one Venturi system

Same body, same valve, same tips, same suction power. Only the powder discharge changes: braided sleeve towards the floor for large industrial booths (V1), 155 cm silicone hose towards the filters for smaller booths (V2).

VENTRAX MAX V1 noir avec sa gaine tressée noireLarge industrial booths

Ventrax Max V1BLACK BRAIDED SLEEVE

—
  • Black braided sleeve on the outlet: the powder is discharged onto the floor
  • Built-in neodymium magnet: the Ventrax sticks straight onto the metal wall of the booth
  • Adjustable air valve, quick coupler
  • Stainless straws, flexible extension
  • 18 tips in rigid, TPU 95A and TPU 85A, plus the mini precision tips
Colour
Wall station (+ 50 €)
VENTRAX MAX V2 bleu avec tuyau silicone et diffuseur mousseSmaller booths

Ventrax Max V2155 CM SILICONE + DIFFUSER

—
  • 155 cm silicone hose: place the diffuser at the booth's extraction filters
  • Silent foam diffuser at the end of the hose
  • Built-in neodymium magnet: the Ventrax sticks straight onto the metal wall of the booth
  • Adjustable air valve, quick coupler
  • Stainless straws, flexible extension
  • 18 tips in rigid and TPU, plus the mini precision tips
Colour
Wall station (+ 50 €)

Secure card payment via Stripe. Delivery by tracked Colissimo.

In the box

The complete kit

V1 or V2, every Ventrax comes with the same 18 VX-marked tips, plus the plastic mini precision tips and the stainless straws. The V1 comes with its braided sleeve, the V2 with its silicone hose and silent diffuser. Ready to work as soon as it arrives.

Kit V2 complet déballé : corps bleu, pailles droite et coudée, tuyau d'air bleu avec coupleur, tuyau silicone, diffuseur mousse, embouts rouges et noirs, embouts de précision
The complete V2 kit, unboxed
Kit V1 complet : corps bleu, gaine tressée noire, tuyau silicone, pailles inox, mousses et embouts
The V1 kit with its braided sleeve
Embouts rigides et souples imprimés, embouts de précision colorés
Rigid and TPU tips
18 VX tipsrigid and flexible: flat, wide, conical, angled
TPU tipshardness 95A and 85A
Stainless strawsstraight and bent
Mini tipsprecision suction: small holes, threads, corners
Flexible extensionfor hard-to-reach areas
Foam diffusersilent outlet

Optional

The wall station

The whole kit stored on the booth wall, within reach. Honeycomb structure printed in black ASA.

  • Holder for the Ventrax and its air hose
  • One slot per tip
  • Clips for stainless straws and silicone hoses
  • Designed so the neodymium magnet sits flush with the wall: docked in its station, the Ventrax is still held against the booth by its magnet
50 €optional with the V1 or V2. Station alone: on request by e-mail.
Add to my Ventrax
Station murale nid d'abeille garnie du Ventrax bleu, des pailles, des 18 embouts rouges, du tuyau d'air et du tuyau silicone avec diffuseur
Wall station loaded with the complete V2 kit
Gros plan de la station : structure nid d'abeille, logements des embouts, bacs de rangement et clips des tuyaux silicone
Tip holders, trays and hose clips
Rendu 3D du passe-paroi VX : écrou de serrage, bague de régulation crantée et coude à 45° avec embout cannelé

Coming soon

VX wall pass-through

Connect your shop vacuum through the booth wall. M42 clamping nut, regulating ring with a detent every 5°, 45° elbow for 12 mm ID silicone hose.

Wall hole Ø43Vacuum Ø32 → 30.49 settings
Watch the 3D animation

The workshop

Handmade, piece by piece

I make every Ventrax by hand in my workshop in Brittany: each body printed in ASA, each fitting set with threadlocker, each straw cut and deburred. You buy directly from the maker, with no middleman. Arnaud, founder of ArmorCAD 3D

Ventrax noir en main à l'atelier, devant une série de corps bleus et noirs et de culots à raccord laiton
Finished black Ventrax Max, in front of the batch in progress
Série de corps Ventrax bleus et noirs avec raccords laiton
A batch of bodies, brass fittings installed
Raccords pneumatiques en cours de collage au frein-filet
Fittings set with threadlocker
Découpe d'une paille inox
Cutting the stainless straws
Ventrax bleu tenu en main, branché sur un vacuomètre analogique pour mesurer la dépression
Vacuum check with an analogue gauge before shipping
Logo ArmorCAD 3D
ArmorCAD 3D

Design, 3D printing and repair. VENTRAX is the range of powder coating tools designed and made by ArmorCAD 3D.

15 daysmoney-back guarantee, beyond the 14 legal days
Stripe paymentbank card, Apple Pay, Google Pay
Made to ordershipped by tracked Colissimo within 1 to 2 weeks
Direct supportyou talk to the maker

Shipping

Shipping and payment fees

Sent by tracked Colissimo, home delivery. The amounts include postage, based on parcel weight and destination country, and payment fees.

French overseas territories: quote on request, just e-mail me. Any customs duties outside the European Union are paid by the recipient.

Liste des commandes en préparation à l'atelier à côté d'une rangée de Ventrax bleus et noirs prêts à partir

Already shipped

All over Europe

More than 50 Ventrax have already left the workshop for powder coating shops in 13 countries.

  • France
  • Allemagne
  • Belgique
  • Pays-Bas
  • Pologne
  • Italie
  • Royaume-Uni
  • Suisse
  • Espagne
  • Autriche
  • Slovénie
  • Croatie
  • Chypre

Frequently asked questions

FAQ

What compressor do I need?
Any workshop compressor that delivers 3 to 8 bar. The side valve lets you adjust suction to the precision of the job.
What is the difference between the V1 and the V2?
Both versions offer exactly the same suction performance. The only difference is how the extracted powder is discharged. The V1 is better suited to large industrial powder coating booths, where the powder can be discharged through the braided sleeve towards the floor or a suitable collection area. The V2 is better suited to smaller booths: its 155 cm silicone hose and brass connector direct the powder straight towards the booth's filtration system. Neither version is more powerful than the other: it simply depends on your working environment and how you prefer to manage the extracted powder.
Can the Ventrax handle the heat of the booth?
The body is printed in ASA, a technical material resistant to heat, UV and common solvents. It must not go into the curing oven.
Why is it cheaper here than on Etsy or eBay?
There is no marketplace commission on this site. The saving is passed on in the price.
Do you ship abroad?
Yes, wherever Colissimo delivers. Choose your country above the models: shipping costs are shown with the total. Every Ventrax is made to order: shipping within 1 to 2 weeks.
How long until it ships?
Every Ventrax is handmade to order. Allow 1 to 2 weeks before shipping, then the Colissimo transit time for your country. You receive the tracking number by e-mail as soon as it ships.
Can I buy tips or a station on their own?
Yes, on request. E-mail me the part you need and I will send you a payment link.

Custom work

A project? Let's talk.

Beyond the Ventrax range, I take on any 3D modelling and 3D printing request. Hard-to-find part, prototype, workshop tooling or custom accessory: I will take you from the idea to the finished part.

3D modellingfrom a sketch, a photo or an existing part
3D printingchamber heated to 65 °C, nozzle up to 350 °C
Hard-to-find partsreproducing or repairing a broken part
Workshop toolingcustom holders, jigs and adapters

Printable materials

  • PLA
  • PETG
  • ASA
  • ABS
  • TPU 95A
  • TPU 85A
  • PC
  • PA
  • PAHT-CF
  • PA6-GF
  • PET-CF
  • PPA

From everyday filaments to engineering grades: carbon fibre (CF) or glass fibre (GF) filled nylons, polycarbonate, PPA, for rigid parts that resist impact and heat.

Describe what you need with a few photos or dimensions: I will check feasibility and send you a quote.

Describe my project

Contact

A question, a quote?

Spare parts, station on its own, trade order or custom project: e-mail me.

contact@armorcad3d.com

Also available on

Follow ArmorCAD 3D on social media